 |
|
Location & QuickFacts
| FAA Information Effective: | 2008-09-25 |
| Airport Identifier: | 75NY |
| Airport Status: | Operational |
| Longitude/Latitude: | 078-18-56.0560W/42-07-00.2370N
-78.315571/42.116732 (Estimated) |
| Elevation: | 1698 ft / 517.55 m (Surveyed) |
| Land: | 0 acres |
| From nearest city: | 7 nautical miles NE of Olean, NY |
| Location: | Cattaraugus County, NY |
| Magnetic Variation: | 10W (1985) |
Owner & Manager
| Ownership: | Privately owned |
| Owner: | Kenneth F. Reiss |
| Address: | Rd 2
Cuba, NY 14727 |
| Phone number: | 716-372-8628 |
| Address: |
|
Airport Operations and Facilities
| Airport Use: | Private |
| Segmented Circle: | No |
| Control Tower: | No |
| Sectional chart: | Detroit |
| Region: | AEA - Eastern |
| Boundary ARTCC: | ZOB - Cleveland |
| Tie-in FSS: | BUF - Buffalo |
| FSS on Airport: | No |
| FSS Toll Free: | 1-800-WX-BRIEF |
Airport Services
| Airframe Repair: | NONE |
| Power Plant Repair: | NONE |
Runway Information
Runway NE/SW
| Dimension: | 3000 x 50 ft / 914.4 x 15.2 m |
| Surface: | TURF, |
| |
Runway NE |
Runway SW |
| Traffic Pattern: | Left | Left |
|
Radio Navigation Aids
| ID |
Type |
Name |
Ch |
Freq |
Var |
Dist |
| LYS | NDB | Olean | | 360.00 | 09W | 10.1 nm |
| EL | NDB | Halos | | 269.00 | 09W | 17.9 nm |
| BFD | VOR/DME | Bradford | 113X | 116.60 | 07W | 24.1 nm |
| JHW | VOR/DME | Jamestown | 094X | 114.70 | 07W | 36.2 nm |
| SFK | VOR/DME | Stonyfork | 023X | 108.60 | 08W | 47.4 nm |
| ELZ | VORTAC | Wellsville | 051X | 111.40 | 09W | 14.2 nm |
| SLT | VORTAC | Slate Run | 086X | 113.90 | 08W | 39.5 nm |
| DKK | VORTAC | Dunkirk | 109X | 116.20 | 07W | 48.2 nm |
Remarks
Images and information placed above are from
http://www.airport-data.com/airport/75NY/
We thank them for the data!
| General Info
|
| Country |
United States
|
| State |
NEW YORK
|
| FAA ID |
75NY
|
| Latitude |
42-07-00.237N
|
| Longitude |
078-18-56.056W
|
| Elevation |
1698 feet
|
| Near City |
OLEAN
|
We don't guarantee the information is fresh and accurate. The data may
be wrong or outdated.
For more up-to-date information please refer to other sources.
|
|
